Glue the swivel chair onto PVC. Choosing a comfortable chair for a PVC boat - DIY tuning
When fishing, fishermen spend a lot of time sitting almost motionless in a boat for hours. Sitting on anything is not only uncomfortable, but also harmful to health. This can even cause a healthy person’s back to become tired and their legs to go numb.
An uncomfortable body position interferes with concentration on the fishing process itself. A high-quality device can protect the fisherman’s back from prolonged loads and from blowing wind.
Hardhave the following advantages:
- High degree of convenience use.
- Versatility, allowing you to mount such a device in any position.
- Relatively cheap price.
Among their disadvantages, many users include the jamming of the turning mechanism that appears over time, which is caused by the formation of rust on the bearing of the turning mechanism.
Folding devices also have their advantages:
- Foldable design, allowing you to instantly unfold such a seat in a boat
- Anti-corrosion materials not exposed to water
- Versatility in terms of the fasteners used
- Possibility among a wide selection of models with a reasonable price.
The disadvantages include the need to select such a device, preferably according to individual characteristics, since the backrest angle of such chairs is different and is not equally comfortable for all users.
Kinds
Inflatable seat
PVC boats can be equipped with various types of seats. They can be included in the kit or installed by the owner himself according to his own preferences.
As a rule, they are divided into two types:
- With a rigid frame.
- Inflatable, soft seats.
Hard seats usually come with the boat when purchased. Their distinctive feature is not only the material from which they are made, but also the design of attachment to the boat. It can be stationary or sliding, thanks to which the chair is able to move along the boat.
A more rational solution for equipping PVC boats are soft inflatable seats. Their distinctive features are their small size and ease of transportation.
They are versatile and can be used both on water and on land. This type of chair is very popular as a replacement for standard “stools” when upgrading. They are equipped with a special support at their base, which prevents a sitting person from turning over. And their soft backs help relieve back strain and provide comfort.
Prices and selection criteria
Chair Boat Seat Style
The comfortable, high-quality seat from Boat Seat Style is very popular. It is easy and secure to install, has a folding plastic back, as well as soft vinyl inserts.
Suitable for most watercraft, thanks to the universal mounting system with 4 screws. This chair is compatible with optional swivel platforms. Its price is about 3 thousand rubles.
The High Back Series folding chair, equipped with an aluminum frame, is one of the most versatile and comfortable options.
It has inserts made of soft but wear-resistant vinyl, allowing you to use it most comfortably in any circumstances. Installation is possible both on a stationary and on a rotating base using four universal screws or bolts. Its price is now around 3,300 rubles.
In order not to make a mistake when choosing a seat for, you need to know that rigid options have a solid frame in their design. It is made in the form of spacers that are attached to opposing cylinders. Therefore, dismantling such complete seats can somehow reduce the rigidity of the entire structure of the craft.
When choosing such devices, you should take into account many conditions, including the complexity and time of the future voyage. Therefore, the determining factor when choosing is the optimal correspondence of the width of the backrest and the entire seat to the weight and height parameters of a person.
If you choose a hard type of seat, then you need to know that the material for it can be either laminated plywood made of many layers, treated with a special impregnation, or textolite used by some companies.
Plywood has optimal strength and reliability characteristics. The use of impregnation to treat the frame of the chair not only on the outside, but also on the ends, protects it from swelling and prevents it from delaminating.
Chair “Standard S4″
Most optimal choice In terms of quality and comfort, the “Standard” S4 and “Standard” S6 seats, which have a soft inflatable base, are superior.
They can be easily inflated using a standard pump and are easy to transport, since when deflated and folded they require a minimum of space.
Due to the fact that they are mounted sideways, they can be installed both at the bow and stern or at the level of the oarlocks. Moreover, regardless of the installation location, they are equally securely secured inside the boat. For production, special boat material is used, with a density of 85-1100 g per m².
Thus, when choosing a chair for a PVC boat, you should be guided by many criteria such as: the design of the frame and fastenings, upholstery and base materials, their quality, ease and versatility of installation, compliance with a person’s individual build and, finally, the optimal price.
How to install?
The most popular option for attaching it to cylinders is mounting on insert mounts. This installation option is achieved by fixing the chair into special inserts on the boat.
Moreover, the fastener is inserted into the lowered watercraft, and after filling the cylinders to the maximum, the fasteners are tightened under pressure and ensure reliable fixation of the seat. Some versions of inserts are equipped with additional fixing elements, as a safety fastener with additional fixation of the seat on the brackets.
More comfortable to use are chairs with a rigid base, which have freedom of movement of the boat along and across, thanks to the system of guides on which they are installed.
Solid PVC is used as guide material. These guides can be attached either along the entire length of the boat or as independent segments.
There is also a less popular, but no less reliable fastening option - the lacing method. It is usually used in inexpensive, small PVC boats. In addition, such a fastening requires preliminary preparation for installing the seat, and also does not provide maximum rigidity of the eyes and metal rings, which predetermined its unpopularity.
How to do it yourself?
Installation of such a device in a PVC boat- this is, as a rule, not a very complicated procedure that requires standard tools that are available in every home: a pair of standard flat-head and Phillips screwdrivers, or a set with an electric screwdriver - that’s all you need.
IN different models Various mounting designs are used for installation. In the case of a swivel chair, at the first stage, mounts for the stand are mounted on the cylinders.
The design of some models already includes them and can significantly facilitate the installation of fasteners of any type for a PVC boat. They are usually made of aluminum pipes, and the design allows them to be adapted to any width of cylinders.
The pipes must be spread in different directions until they fit tightly into the cylinders and secured with bolts to adjust the position. The entire operation takes a minimum of time and effort.
At the next stage, you can screw the rotation mechanism onto the installed stand. It is usually installed immediately behind the stand to check the compatibility and performance of the entire structure.
The seat itself can be secured with 3-4 bolts or self-tapping screws right before going out on the water. This is not such a quick process, especially if you do not use a special tool such as an electric screwdriver each time, so immediately after purchase, many people upgrade the holes for attaching the chair to nuts and studs.
- Wide selection of soft designs gives you the opportunity to choose the best option according to price and personal preferences of the buyer. Most of these seats come with special belts and metal ribs to ensure maximum reliability and rigidity of the structure. The straps also serve as a good way to secure the cover for a chair made of non-slip material.
- On the rotation device Any type of seat can be installed - both inflatable soft and folding hard, the main condition for this is the presence of a universal seat.
- Both soft and inflatable seats have optimal performance properties. The first ones have a plastic or aluminum base with waterproof vinyl printed on it. And inflatable chairs are inflated with a simple frog pump, they are the lightest and most compact when folded, which is very convenient for transportation. Both options are firmly mounted side by side, between the cylinders without changing the design of the boat.
- Upholstered seats have different mounting methods depending on the company. One of the most convenient options is to secure the chair on a stand with two high-strength belts. This procedure requires a minimum of time, so the soft chairs are convenient not only because of their simplicity of design, but also because of the speed and ease of installation.
Chairs for inflatable boats
PVC inflatable boats can be equipped with a wide variety of seat types. They can be included as standard or installed individually and selected by the user based on personal preferences. PVC boat seats are conventionally divided into into two types:
- hard chairs;
- soft or inflatable chairs.
Before we talk about boat tuning and possible options chairs, let's see what usually comes included and what you have to work with. If anyone is not interested, it is better to immediately skip this section and go to the selection rules.
Standard seats are usually a hard type of seat. Such chairs differ not only in the material used for production, but also in the type of fastening. The mounts can be stationary or allow the chair to move using special guides along the cylinders.
The most common stationary option is attachment to cylinders using special glued inserts. With this method of fastening, the chair is fixed in the inserts, and by inflating the cylinders, its final and reliable self-fixation. Models of some inserts are equipped with special internal fasteners, which serve as additional means of holding the chair in the brackets. Rigid chairs are more convenient, which can be moved to almost any position using special guides. The material for the guides is monolithic PVC. The guides themselves are mounted along the entire length or in the form of separate segments.
There is a reliable, but less common lacing option. It is mainly used to equip budget options PVC boats. This type of fastening is less popular due to the significant time required to install the chair, as well as due to the instability of the eyes and metal rings.
It is more advisable to use soft or inflatable chairs to equip PVC boats. Distinctive features This type of seat is compact in size and mobile. They can be used not only in a boat, but also on land. This seat option is most often used instead of standard seats or as a kind of tuning.
The soft back relieves the back of the sitter and adds comfort. A special stop at the base of the soft chair makes this seat very stable and does not allow it to tip over.
A variety of soft seat designs allow you to choose the best option depending on your budget and individual preferences. Many soft seats are equipped with special stiffening belts or stiffening ribs. The use of special non-slip capes allows you to increase the level of comfort.
How to choose a chair
To make the right choice need to know that hard chairs for inflatable boats are additional elements of a rigid frame. These are a kind of spacers that hold opposite cylinders. Removing the stock hard seats may slightly change the overall structural rigidity.
When selecting such accessories, it is necessary to take into account all sailing conditions and the degree of load. It is recommended to pay attention to the correspondence of build and height with the width of the back and seat of the chair. If the choice fell on a hard seat, then you should know that can be used as a material for such a chair:
- Multilayer laminated plywood, which is treated with a special impregnation;
- Textolite, which is used singly and only by certain manufacturers.
Standard S-4 and Standard S-6
The advantages of using multilayer plywood are sufficient strength and reliability. Not only the outer surfaces, but also the end parts are treated with impregnation. This helps protect the plywood from delamination and moisture accumulation.
Good and high-quality options are soft or inflatable seats "Standard" S4 And "Standard" S6. They are easily inflated using a pump pump, and when folded they take up minimal space. Both chairs can be used on land and in backpacking conditions.
These comfortable and soft seats are fastened with a spacer, which allows them to stay perfectly firmly inside the boat. You can choose the installation location: bow, stern, or oarlock level. Boat material is used for production with a density of 850 – 1100 g per m².
A comfortable and high-quality chair is in great demand Boat Seat Style. This simple and reliable design is attached to the seat and has a folding back made of plastic, as well as soft inserts made of high-quality vinyl. They can be equipped with most boat models. Installation is carried out using 4 self-tapping screws. An optional turntable can be used.
Self-tuning of chairs for PVC boats
Hard seats do not allow them to be used for a long time with a feeling of comfort. The use of special pads, which are attached using special adhesive tapes, helps to correct the situation. Such linings, due to the insertion of sheet foam rubber or polyurethane foam, make the seats softer and have good thermal insulation. The special material from which the outer part is made has water-repellent properties.
A convenient option is to install an additional chair equipped with a reclining backrest. Their structural properties are similar to conventional fishing chairs and are attached to hard seats. If you make them rotate 180°, they become very convenient components. Such seats are attached with bolts to a rigid seat. The inside of the bracket has a bearing that rotates the axle.
Installation of a rotating device - video
Self-installation of the chair on the inflatable boat must be carried out in accordance with certain rules and instructions. The hardest thing to do correct installation rotating device in a PVC inflatable boat. The following video instructions will allow you to complete the entire installation correctly and as easily as possible:
Fishing is not a matter of minutes. One can say more that many spend several hours doing this activity. And, you see, it’s not very convenient to spend all this time standing. What if you are fishing on a boat? Here rest is simply necessary. Moreover, some models of PVC boats are not designed for standing fishing. In this case, equipping the watercraft with a comfortable chair is simply necessary.
Types of seats for PVC boats
Conventionally, boats are divided into three types, depending on the material used in their manufacture.
- Tough. Made of plastic or moisture-resistant plywood.
- Soft. The type is similar to the first options, only they additionally provide padding for the chairs for convenience.
- Inflatable. Made from durable nylon fabric.
Hard seats are often standard. They are fixed stationary, in one position, or can be movable and move along the cylinders or around their axis.
Inflatable chairs are very comfortable; they do not take up much space in a hiking backpack or car trunk. The only drawback is that they are installed in one position. In this case, ordinary seats made of plastic or plywood, with a rotating device, benefit. This type of fastening allows you to turn in any direction, increasing the efficiency of fishing.
Swivel chair
Devices that are convenient in all respects. Installation is carried out on special longitudinal panels fixed between the cylinders or special stands. If necessary, the location can be swapped, installing in the stern or bow of the boat. The seat is mounted on a panel, with a separate rotating mechanism. The bearing that provides rotation is reliably protected from moisture by special lubricants.
Any type of seat, both inflatable and rigid folding, can be used with rotating devices. The main thing is the presence of a seat for a rotating insert.
Advantages and disadvantages
The following points can be highlighted from the positive qualities:
- Ease of use.
- Possibility of installation in any position.
- Inexpensive cost.
Among the shortcomings, some owners highlight the jamming of the rotary mechanism. In particular, the bearing, in models where it is poorly protected from moisture, rusts over time and stops rotating.
Cost of popular models
Chair HighBack series (8020-570). Upholstered chair for all types of boats. Vinyl pillows are made of high quality material adapted for use in aquatic conditions. The base of the chair is aluminum, fastening to the rotating device is done with 4 screws. Cost 3299.80 rub.
Chair Pro series (7500-540). Soft seat for all types of boats without a backrest. Pillow made of high-strength vinyl, adapted for use in marine conditions. Attached to the boat with 4 self-tapping screws, to the rotating device, with separate bolts. Cost 2015.20 rub.
Folding chair
This version of seats for boats can be used both on a stationary mount and on rotary mechanisms. Book design makes it easy to transport. When folded, they do not take up much space.
Various materials are used in production. This can be high-strength plastic, impregnated plywood, or upholstered chairs.
Pros and cons of folding chairs
These universal seats are characterized in their own way by many users:
- The folding design allows you to quickly assemble them on site and install them in the boat without any problems.
- The materials used in production are not subject to corrosion. Even the soft upholstery is adapted to the aquatic environment.
- The ability to use any mounting options makes these seats universal in their kind.
- Also, some models are inexpensive.
Among the shortcomings some note an uncomfortable backrest tilt. But this depends on the models, and this must be taken into account when choosing.
Cost of popular models
Boat Seat Style (5444-317). Comfortable plastic chair with folding backrest. Soft inserts made of high-strength vinyl make the model especially comfortable. Can be used in any type inflatable PVC boats. Fastening is done with self-tapping screws to the stand. Can be used stationary or on a rotating platform. Cost 2756.60 rub.
Chair High Back series (8021-502). The aluminum frame is made in a folding version, which makes this seat as comfortable as possible. Soft inserts made of high-strength vinyl allow you to use the chair in any conditions. Fastening to a stationary or rotating mechanism is done with 4 screws or bolts. Cost 3330.10 rub.
How to choose a chair for a PVC boat
This is the question most inflatable boat owners ask. Right choice seats, will maximize comfort and ensure perseverance in place. And the first thing to consider is the rigidity of the structure.
The inflatable boat itself, although it has a certain strength when fully inflated, can lose its shape when the size of the frame supports changes. This is due to the installation of hard seats. They are mounted on special spacers held by opposite cylinders. And when removing old, from standard structures, the shape of the vessel may change slightly.
When choosing a chair model, also compare the maximum load on the boat. Pay attention to the configuration and the height of the backrest. It must correspond to height, which affects ease of use.
If your choice is a rigid structure, then they are made of the following material:
- Laminated plywood, treated with water-repellent compounds.
- Textolite. Only some manufacturers use this material.
- Aluminum, are also rarely used, but some companies produce chairs from this material.
The use of multilayer plywood, in addition to its low cost, affects the strength and reliability of the chairs. Impregnation is carried out from all sides, and even from the ends. Therefore, there is no need to worry that moisture can penetrate into it and delaminate.
Soft or inflatable seats have good performance. In the first, the frame is made of plastic or aluminum, with heels made of waterproof vinyl. Inflatable, light in weight and inflated with a regular frog pump. Both options take up little space when folded. They are installed by surprise, between the cylinders, which allows them to hold firmly without disturbing the structure.
Installing a chair in a PVC boat
Depending on the model, the seats in PVC boats are secured in different ways. If this is a swivel seat, then first holders for the stand are installed on the cylinders. Some models already have them. Then a rotating mechanism is mounted on it. Usually it is attached at a time, and is always installed together with the stand. The chair is installed immediately before going out on the water, and is fixed with 3-4 bolts. Some models of rotary devices provide for installation on self-tapping screws. This is not very convenient, and many people remake the holes to use nuts with a stud.
Soft chairs, also attached different ways, depending on the model. The most convenient option is a belt one. When installed, the seat is securely fixed to the stand with two strong straps. This requires a minimum of time, so the convenience of soft chairs is not only in their design.
PVC chair stand
This device greatly simplifies the installation of any type of PVC boat seats. They are made of aluminum tubes, and their structure is designed so that the model can change in size, adjusting to the width of the cylinders. The tubes are moved in different directions and secured with adjusting bolts. This allows you to quickly install it in the boat.
They also vary in type of fastening. These include stands for regular folding chairs, stationary mounting, and it is also possible to purchase models with swivel mechanisms. The seats are fixed with a threaded connection using four bolts.
In general, there is nothing difficult about it and its installation. The variety of models presented in specialized centers and online stores allows you to choose a seat for any type of boat. And if the stationary model does not suit you, you can easily replace it with a more convenient option.
The market for fishing products is currently so diverse and multifaceted that choosing a suitable product will not be difficult. Alternatively, you can make the seat yourself.
What kind of seats are used in boats?
Depending on the type of material used in the production of the chair, boat seats can be:
- Rigid, made of high-quality plastic or moisture-resistant plywood.
- Soft, where special padding is used as additional accessories to increase the level of comfort of the product.
- Inflatable, made from durable nylon fabric.
As a rule, hard seats are standard equipment. They are fixed stationary, in one position or in a movable state, where movement is carried out along the cylinders, around their axis.
Inflatable products are very popular due to their small size; they are easy to transport both in a tourist backpack and in the trunk of a car. But there is also a drawback: installation in only one position. Here it is more advisable to give preference to ordinary seats made of plastic or plywood, equipped with a rotating device, which makes it possible not to limit your actions.
1. Swivel chair
The product is easy to use and is installed on longitudinal panels located between the cylinders or on appropriate stands. If necessary, it can be moved from the stern of the vessel to the bow.
It is mounted on a panel with a self-rotating device. To protect the bearing from moisture, it is lubricated with a special lubricant. The swivel mechanism fits every type of seat. The main condition is the availability of space for such a mechanism.
Advantages: high level comfort, can be installed from any angle, affordable price.
Negative sides: frequent jamming of the rotating device (the bearing is not sufficiently lubricated, which leads to corrosive changes, in end result– stops rotating).
2. Foldable
The product has a book design, which makes transportation easier. Both stationary mounting and rotary mechanisms are appropriate here. The materials used are high-strength plastic, impregnated plywood, and upholstered seats. Most often, the folding model is rotating.
Advantages: versatility, quickly assembled and disassembled, the material is not subject to corrosion, affordable cost of the product.
Flaws: The backrest causes discomfort when tilted.
How to choose
A chair for a boat should be functional and as comfortable as possible; in order to correctly select a suitable product, the following points must be taken into account:
- Structural rigidity. When the size of the supporting elements of the frame changes, an inflatable vessel may lose its original appearance, despite its strength in the inflated state. This nuance is a consequence of the installation of hard seats. To fix them, use suitable spacers placed on the cylinders. If old ones are removed, then the form vehicle is subject to deformation.
- Compliance of the product and the maximum permissible load on the craft.
- Compliance of build and height with the seat parameters (width, thickness and height).
It is important to know that rigid structures are made from:
- Laminated plywood, which is treated with a water-repellent compound on all sides, which does not allow the product to delaminate.
- Textolite.
- Aluminum (rare).
Unlike hard chairs, soft (the frame is made of plastic or aluminum with pads made of waterproof vinyl) and inflatable (brought into working condition by a pump - a frog) seats have higher performance qualities. Such varieties are quite convenient for transportation, storage, and can be mounted at random.
Popular models
Among the best examples are:
High Back Seat (8020 – 570). A soft option suitable for every type of watercraft. The cushions are made from high quality marine grade vinyl. The structure is made of durable aluminum and is attached to the rotating mechanism with four self-tapping screws. The product can withstand a person’s weight up to 120 kg.
Dimensions of the chair: width 41 cm, height 55 cm, depth 36 cm. The chair has gained particular trust among consumers due to its versatility, functionality, practicality and reliability. The cost varies from 5500 to 6000 rubles.
Seat Pro (7500 – 540). Soft, without a back, for any type of vessel. The cushions are made from premium quality vinyl and perform well in aquatic conditions. Installation is carried out using four self-tapping screws on a perfectly flat surface.
Capable of supporting a weight of 120 kg. Dimensions: width 41 cm, height 16 cm, depth 27 cm. It is lightweight, compact and comfortable to use. The cost of the product is from 2700 to 3200 rubles.
Seat Boat Style (5444 – 317). The product is compact, has a folding back made of plastic with soft inserts made of premium vinyl. The model is adapted to marine conditions and is installed on many watercraft.
It is more advisable to install it on a flat surface using four self-tapping screws for greater reliability. Product dimensions: width 50 cm, height 40 cm, depth 43 cm. The maximum permitted weight is 120 kg. Cost from 2700 to 3000 rubles.
High Back Seat (8021 – 502). The frame of the model is aluminum, the design has a folding format, which increases the level of comfort during use. Thanks to functional inserts made of high-quality vinyl, it can be used under any conditions.
It can be installed on both a stationary and a rotating mechanism (using 4 self-tapping screws). The price ranges from 3300 to 3500 rubles.
How to catch more?
Over 7 years of active fishing, I have found dozens of ways to improve the bite. Here are the most effective ones:
- Bite activator. This pheromone additive attracts fish most strongly in cold and warm water. .
- Promotion gear sensitivity. Read the appropriate manuals for your specific type of gear.
- Lures based pheromones.
How to make a chair with your own hands
You can design and install an inflatable seat for a swimming device yourself. But here you cannot do without knowledge of manufacturing technology and certain experience in working with this material.
Of course, it will not be possible to fix such a product on a rotating mechanism, since there are no rigidity elements, but it will be quite possible to increase the level of comfort of the craft.
Required components and tools:
- Polyvinyl chloride fabric with a density of 900 g/m2.
- Tape for joining joints.
- Waterproof adhesive for joining seams.
- Polyamide threads.
- Tool for cutting material (scissors).
- Poster sheets large sizes or unnecessary wallpaper.
Instructions:
- Choose a suitable convenient place.
- Find a pattern.
- Transfer the drawing to paper and cut out the parts strictly along the contour.
- It is rational to place templates on the fabric and cut out elements with maximum adherence to the marking line.
- Roll the finished elements into a tube and sew along the edges.
- Tape the joints on both the inside and outside.
- In the lower cylinder you need to place a valve for pumping air.
- All parts must be assembled into a single structure, where the upper and lower blocks are assembled first, and then joined together.
- Check the tightness of the joints: inflate the structure and immerse it in a container of water. The absence of air bubbles indicates a high-quality assembly of the seat.
A purchased chair, if there is discomfort during use, can be improved with the help of special pads. They are attached to special adhesive tapes. Thanks to such linings made of sheet foam rubber or polyurethane foam, the seat becomes soft, comfortable and has good thermal insulation qualities. The outer part of the pads is made of a special material with a water-repellent effect.
You can also use an additional reclining chair installed on a hard seat. To make such a product rotate 180 degrees, you will need a bracket with a bearing and bolts.
Installation
Types of fastening, taking into account design features chairs:
- For rotary models. First of all, special holders for stands are mounted on the cylinders. On some models the manufacturer has already provided such elements. After installing the stand, the rotating device is attached. The chair itself is mounted (3-4 bolts) immediately before swimming. Nuts and studs can be used as fasteners.
- For soft variations, the most common method is used - the belt method, where the seat is secured with two strong belts. This method significantly reduces the time for installing the structure.
A chair stand for an inflatable boat made of polyvinyl chloride is considered not only a functional element, but also universal device, suitable regardless of the type of seat. The stand is made of aluminum tubes, the design can be changed in parameters that are optimally suited to the width of the cylinders.
To fix the device using adjusting bolts, the tubes must be moved apart. Depending on the type of fixation, they are available in simple models of folding format, stationary design, and with rotating elements.
Operating rules
In order for the chair to serve for a long time and not spoil the inflatable boat, it is recommended during operation to pay attention to:
- Seat installation quality.
- Check for abrasions at fastening points.
As a way out, you can stick additional protection made of PVC material in the places where the chair comes into contact with the sides of the vessel.
- Choose a chair for inflatable boat made of PVC, taking into account the passenger’s build and height.
- When purchasing, carefully inspect the specific product for various damages and abrasions.
- If the seat is made in-house, you must carefully check the seams for leaks.
- It is recommended to install the seat taking into account all the rules.
- Fasteners must be of high quality and sufficiently fixed.
- When using such an accessory, ensure that the boat is not damaged.
